Full automatic wire cut strip one end crimping another end stripping tinning 501S

Full automatic wire cut strip one end crimping another end stripping tinning 501S

Features

1. Cut off the wire, peeling, tin and other related actions will be automatically adjusted with time.

2. The production line can range from AWG18-AWG32, which is very practical.

3. This machine has the function of twisting.

4. ultra short line: middle leaving glue for 18mm

5. The machine's tin angle is close to 90 degrees so that the diameter of the wire is evenly distributed.

6. The machine adjusts the depth of spots by dispersion control. Make the spot depth more accurate.

7. The machine is suitable for horizontal, straight OTP mold.

Model WPM-501S

Capacity Wire length 50mm, about 3,200 wires/hour (no twisting)

Applicable wire diameter AWG# 32 ~ AWG#18

Processing length (Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm)

Stripping length Front 0.1~8.0mm rear 0.1~18.0mm

Cutter depth Maximum adjustment 3.50mm resolution 0.01mm

Cutting tolerance Modifiable

Crimping capacity 2 Tons

Detection device Low air pressure, existing of electric wire, existing of the terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.

Auxiliary device Prewire feeding synchronizer, terminal waste paper rewinding device

Power supply single-phase, AC180V~242V, 50/60Hz, 10A

Compressed air 0.5 MPa(5kgf / cm2) clean dry air

Dimension 1,800W × 900D × 1,450H, about 400KG